ENERGY CONSUMPTION METER
UK - 2
PCF-605
2. Set rate 2. For example € 0.07.
3. Use the “+” button to increase the value of the
flashing position from 0 to 9; use the “-“ button to
decrease the value of the flashing position.
4. Press the “MODE” button to move to the next
position.
5. Pressing the button for longer than 5 seconds will
accept your settings and return you to the display
screen. If you only have 1 rate, set billing rate 1 to 00:00
and the cost per KWh. Set the time for billing rate 2 to
00:00 and enter the cost per KWh.
Introduction to display screens
There are 3 display screens that contain three different
types of data. Use the “MODE” button to select the type
of screen you wish to view.
Display 1 Current time (24-hour
clock), day, current consumption of
the
connected appliance and current cost
per hour.
Display 2 Total registered time, total
energy consumed per Kwh and cost
per Kwh of actual energy consumed
(only indicates both values if at least 1
KWh has been used).
Display 3 Total registered time, total
time worked and percentage of time
worked.
Technical data
Operating voltage: 230V AC (50/60 Hz) alternating
current (AC)
Maximum power of connected appliances: 3680 W
Maximum current: 16A
Input/ Output: via earthed socket
Operating temperature: + 10 to +40° C
Energy display: 0 kWh to 999.9 kWh
Maximum registration time: 9999 hours
Only use indoors (IP20)
Maintenance
Check the Energy Meter regularly for damage.
Use only a dry, soft cloth to clean the unit and the
LCD screen.
Use no cleaning products.
Never immerse the unit in water.
Maintenance and repairs may only be performed by
technicians familiar with the applicable regulations.
Declaration of conformity
ELTRA NV, Pachtgoedstraat 2, 9140 Temse, Belgium hereby
declares that the product PCF-605 satisfies all essential
requirements and other relevant stipulations of LVD directive
2006/95/EC, and has been tested according to the following
standards:
EN 61010-1:2001
The original declaration of conformity can be obtained at
www.profileDIY.com
Guarantee
The guarantee period for PCF-605 is 2 years, and begins on
the date of purchase.
During the guarantee period, Eltra NV will repair all defects
due to shortcomings in material or manufacturing. Eltra NV
may choose to repair or replace the defective device.
Eltra NV is not required to repair or replace units that were
subject to damage, improper use, or modifications or changes
that were made after the date of purchase.
Bring the defective unit, together with the original proof of
purchase, to the shop where it was purchased.
Always include a note describing the problem.
Damage claims
Eltra NV can may not be held liable for damage of whatever
kind if the unit was not correctly installed according to the
prescribed installation instructions, or for damage resulting
from unforeseen circumstances such as natural disasters,
lightning strikes,.... Thus, all costs resulting from these
situations are exclusively for the expense of the buyer, and are
not covered by the guarantee conditions.
