BEFORE CONNECTING AND USING LED POWER RGB, IT IS IMPORTANT TO READ CAREFULLY
ALL THE INSTRUCTIONS IN THIS MANUAL.
QUALIFIED PERSONNEL ONLY, IN COMPLIANCE WITH ALL THE SECURITY LAWS, CAN DO THE
INSTALLATION, THE MAINTENANCE AND THE UTILISATION OF THIS POWER SUPPLY.
BEFORE CONNECTING LED POWER RGB, MAKE SURE THAT THE FREQUENCY AND THE
VOLTAGE VALUES ARE SUITABLE AS SPECIFIED ON THE POWER SUPPLY.
Dimensions & weight
Technical data
-
IP30
protection rate
- Aluminium body
- Ideal for ceiling, false ceiling, wall, trusses…... Can be installed in any position
- Input voltage range: from 85Vac to 265 Vac. Frequency: 50-60 Hz
- 0,95 PFC electronically controlled
- Can drive up to 36LEDs (RGB) or 48 LEDs (RGB+W) at 350mA
- On request it is possible to use 700mA controlled current
- 4 independent LEDs groups: 12 Red, 12 Green, 12 Blue and 12 White or Amber
- Electronic board 8/16 bit resolution with 4 digit display
- RJ45 panel connector for LEDs connection
- Works via signal DMX, works in stand alone mode (Master/Slave)
- On request it is possible to use infra-red remote control (with pre-programmed sequences)
ATTENTION!!!
PLLEDC2091 is designed to drive:
max 10 PLLEDMPRGB
max 10 PLLEDMPW1-2-3
max 10 PLLEDSC25
max 10 PLLEDSCW1-2-3
max 4 PLLEDLB930
max 4 PLLEDLB9W30