Productos McLand GARLAND CHOPPER 452 ZE Series, Instruction Manual

Page: 22 / 120

English
22/120
1. Introduction 22
2. Security measures 23
3. Warning symbols 29
4. Machine description 30
5. Start up instructions 32
6. Using the machine 34
7. Maintenance and service 35
8. Trouble shooting 37
9. Transport 38
10. Storage 38
11. Recycling or disposal of your machine 38
12. Warranty conditions 39
Declaration of conformity CE 40
Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
performance of this machine, which will facilitate your
task for a long period of time. Remember that this
machine has the most extensive and expert technical
assistance network which you can consult for the
maintenance, troubleshooting and purchase of spare
parts or accessories.
Warning! Read all safety warnings and
all instructions. The failure to observe all
warnings and instructions below can result
in fire and/or serious injury. Before using this machine,
carefully read the information in this manual on
correct setup and safe techniques.
This machine is for domestic use and is designed
for cutting logs up to 35 cm in diameter (*) and a
maximum of 52 cm in length (*), with the ends cut
perpendicular to the axis of the trunk by shears due
to pressure generated by a hydraulic piston that
applies the blade to the trunk. Any other use could be
dangerous to you, people, animals and things that are
around and can damage the machine.
Only cut trunks that have the ends perpendicular to
the axis of the trunk. The ends of the logs to be cut
should be at a right angle.
Make sure there are no nails or foreign objects in the
trunks being cut. Foreign objects and nails may be
projected and cause major injury.
Do not cut logs that have branches. The branches
should be cut in flush with the trunk.
Do not use this machine to try to cut any other object
that is not a trunk. This machine and its safety devices
INDEX 1. INTRODUCTION
Ref.:GCCCHOPPER452ZEV17M1217V1
DATE OF PUBLICATION: 29/12/2017
DATE OF REVISION: 29/12/2017
TRANSLATION OF THE ORIGINAL INSTRUCTIONS