Prodigy PD-DVR4CD-500, Installation & Operation Manual

Page: 34 / 69

5-1. Network Connection
Minimum PC specification (4, 8/16CH)
CPU : 4CH- Pentium III 750MHz over, 8/16CH- Pentium 1.7GHz over.
Graphic Memory : 4CH- 32M over, 8/16CH – 64M over.
IP Viewing
Connection with the DVR is established by inputting the IP address of the DVR (router if on the
WAN) on the Internet Explorer window. If Using the DDNS to connect to the DVR input the
registered domain on IE
Downloading ActiveX Control
When DVR connects to the network and the IP address of the DVR is inputted on Internet explorer, a
download activeX control will be displayed under address bar on IE. In case that no downloading “Active
X control” has been installed previously or a higher version is not on the client PC, then select “Yes”. To
Install ActiveX. After the install a Log In window will open.
Log In
When Log-In window appears, input the ID & Password. Then, click “OK”, which starts the live
monitoring.
Default Login Info:
ID: admin
Password: 00000000
NOTE: If ID & PW is input wrong, the Log-in box appears repeatedly. If you need to close login and exit
simply click on Cancel to close the software and login window.
Live Monitoring
Client program is optimized on the resolution, 1024 x 768 .
Channel Button
Numbers on the right side of the software
indicate how many channels are active on
Live/Playback modes. When a relevant channel
is selected it brings up only that particular
image to a full , single image and the button
turns green .
Channel Division
Multi-channel division will be done during the monitoring or playback . As seen in
picture, 1,4,8,9,16 division is supported. To switch to multi-View screen simple
click on any of the 5 options if available. ONLY 16 will have all options.