Prodigy PD-DVR4CD-500, Installation & Operation Manual

Page: 27 / 69

PTZ Menu
▶
PAN / TILT / ZOOM
▶
FOCUS
▶
SETUP
Z
SETUP
Channel : 1 ~16
ID : OFF, 1 ~15
Protocol : Pelco-D ~ P
Baud Rate : 2400, 4800, 9600BPS
Save and Exit
Program Update
The latest firmware version can be upgraded through USB 2.0 Port using Memory Stick. When
memory stick connects USB port, will be shown on the right corner of monitor. Then,
enter Main Menu > System Set > Program Update . If the system recognizes the new program, it will
promp you on the monitor “ New program found ” will be displayed on the screen. Press “Select” Key to start
upgrading. Percentage Progress will be displayed.
NOTE .
1. If the system doesn’t recognize “new program”, “ New program not found” will be displayed.
2. Compatible USB memory jump drives: Lexar Jumpdrive 128/256MB, Sandisk Mini Cruzer 128MB &
Cruzer Micro 256MB. (other brands may work)
3. For System Stability, During the upgrade please turn off
1) Recording
2) Playback
3) Network connection
4. After updating program, reboot is required.
Sensor
Sensor Input options are: N.C, N.O, None .
Select Closed Contact or Open Contact or NONE .
PTZ
SENSOR
▶
SENSOR 1 INPUT : N.C
SENSOR 2 INPUT : N.O
SENSOR 3 INPUT : NONE
SENSOR 4 INPUT : NONE
ALARM OUT : ON
SAVE AND EXIT