Prodigy PD-DVR4CD-500, Installation & Operation Manual

Page: 28 / 69

Available Protocol are Pelco D, P / Baud Rate can be selection 2400, 4800, 9600BPS.
Check rear of the DVR for RS422/485 connections marked with + , -
3. Network Set
To enter Network Set menu, the admin logon will need to be entered. (default is 00000000).
When the Static IP is being used, each address is required to be filled out as per network environment.
IP Address, Sub Net Mask, Gateway and Primary DNS (Gateway may be used)
In static IP environment, no need to change DVR & Web Server Port. When behind a Router (firewall) both
ports need to be opened for the IP address assigned to the DVR. Ports that need to be forwarded are 2000
and 80 . If port 80 cannot be opened on the router, the port # may be changed on the DVR to other port #
(expl: Web Port: 88) When connecting with the static IP address use _. _ . _ . _ :88 (port # must be identified
after the IP address if it’s different from the default port 80.
As per DVR & Web server port, refer to Appendix 4.
If user is on the condition of “Dynamic IP”, the following will be shown.
For users in dynamic IP, either XDSL or Cable . In XDSL environment XDSL user ID and
password is required in most cases it is the e-mail address and password of ISP provided account. In cable
environment, Mac address is required to be filled out irrespective of ID and password.
DDNS Server is needed when clients need to connect to the DVR with a Dynamic IP, since the IP address
always changes from the ISP. Registering a ID & domain with www.dyndns.org, is free by clicking on DDNS
server follow instructions on page 71 Appendix 4.
NETWORK SET
▶
USE DYNAMIC IP: NO
IP ADDRESS :000.000.000.000
GATEWAY :000.000.000.000
NETMASK :000.000.000.000
DNS SERVER :000.000.000.00
DVR PORT 2000
WEBSERVER PORT 80
SAVE AND EXIT
NETWORK SET
▶
USE DYNAMIC IP: YES
XDSL USER ID :
XDSL PASSWORD :
DDNS USER ID :
DDND PASSWORD:
REGISTERED DOMAIN:
SAVE AND EXIT