Procon V3D Series, Programmer'S Manual

Page: 80 / 88

H - I - J
PROGRAMMER’S MANUAL
V8.94.11-
- 80 -
Programming guide
Below, sample programs are shown for some frequently used control and regulation tasks.
They may help at programming.
Control from terminal between 5 and 60 Hz
Submenu Setting
1-5-1 source of the control reference signal terminal
4-8-1 terminal control yes
8-1 f maximum 60 Hz
8-2 f minimum 5 Hz
8-3 frequency inhibit limit 70 Hz
1-1 control reference signal 5 - 60 Hz
4-11-1 digital input 1 type selection N
4-12-1 digital input 2 type selection N
The commands start, stop, direction and frequency change can be given from the terminal.
Control from terminal blocks with potentiometer between 10 and 50 Hz
At the lower extreme position of the potentiometer the driven unit has to stop.
Submenu Setting
1-5-1 source of the control reference signal analogue IN 1.
4-1-1 analogue input 1. type potentiometer
4-1-2-2 analogue input 1. stop range 3%
4-1-2-3 analogue input 1. hysteresis 1%
8-1 f maximum 50 Hz
8-2 f minimum 10 Hz
8-3 frequency inhibit limit 55 Hz
The commands start, stop and direction, can be given through the digital terminal blocks (SD), the frequency can be
changed with the potentiometer connected to the analogue terminal blocks (SA).
T
he lower extreme position of the potentiometer sets “waiting” mode!
Control from terminal, reference signal change between 1 and 100 Hz with motor potentiometer
function
The motor potentiometer function should be activated from the Digital IN1 and IN2 inputs or from the terminal!
Submenu Setting
1-5-1 source of the control reference signal motor potentiometer
4-8-1 terminal control yes
4-11-1 digital input 1 type selection N
4-12-1 digital input 2 type selection N
8-1 f maximum 100 Hz
8-2 f minimum 1 Hz
8-3 frequency inhibit limit 110 Hz
4-14-1 digital input 4 type selection logical functions
4-14-2 logical functions motor potentiometer up
4-15-1 digital input 5 type selection logical functions
4-15-2 logical functions motor potentiometer down
4-9-2-1 motor potentiometer up time 10,0 s
4-9-2-2 motor potentiometer down time 10,0 s
4-9-2-3 motor potentiometer clear no
11-12 terminal function motor potentiometer
The commands start, stop and directions can be given from the terminal.
Changing the frequency can be effected with Digital IN 4. and IN 5. or in display mode with the terminal push buttons

and

(motor potentiometer up and down).