B687
33
EDO CASX# MA Wait State
EDO RASX# Wait State
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time
SDRAM CAS latency Time
SDRAM Precharge Control
D
efault: 1
D
efault: 1
D
efault: 3
D
efault: 3
D
efault: 3
D
efault: Di
sabled
Theses items are setting by
Auto Configuration.
Auto Configuration :
By default, this parameter is set to Enabled. This
automatically enters and locks the optimum settings for the chipset. Disable
the parameter to unlock the settings without changing them.
System BIOS Cacheable
D
efau
lt: Enabled
System BIOS segment is cacheable if this item been enable.
Video BIOS Cacheable
D
efault: Enabled
Video BIOS segment is cacheable if this item been enable.
Video RAM Cacheable
D
efault: Enabled
Video RAM segment is cacheable if this item been enable.
8 Bit I/O Recovery Time
D
efault: 1
The recovery time is the length of time, measured in CPU clocks, which the
system will be delay after the completion of an I/O request. This delay takes
place because the CPU is operating so much faster than the input/output bus
that the CPU must be delayed to allow for the completion of the I/O. This
item allows you to determine the recovery time allowed for 8- bit 1/0.
Choices are from NA, 1 to 8 CPU clocks,
16 Bit I/O Recovery Time
D
efault
: 1
This item allows you to determine the recovery time allowed for 16-bit 1/0.
Choices are from NA, I to 4 CPU clocks.
Memory Hole At 15M-16M
D
efault: Disabled
In order to improve performance, certain space in memory can be reserved
for ISA cards. This memory must be mapped into the memory below 16MB.