Comment:
If it is not possible to fit the cuff to the left arm, it can also
be placed on the right one. However all measurements
should be made using the same arm
5.4. Measuring procedure
After the cuff has been appropriately positioned the measurement can begin:
a) Press the O/I + MEMORY-button, – the pump begins to
inflate the cuff. In the display, the increasing cuff-
pressure is continually displayed.
b) After reaching the inflation pressure, the pump stops
and the pressure slowly falls away. The cuff-pressure
(large characters) is displayed during the
measurement.
c) When the device has detected the pulse, the heart
symbol in the display begins to blink and a peep tone
is audible for every pulse beat.
d) When the measurement has been concluded, a long
peep tone sounds. The measured systolic and diastolic
blood-pressure values as well as the pulse frequency
are now displayed.
e) The measurement results are displayed, until you
switch the device off. If no button is pressed for
5 minutes, the device switches automatically off, to
save the batteries.
5.5. Memory – displaying the last measurement
The measured results are stored in the instrument until a
new measurement is carried out or the batteries are
removed. You can call up the stored values at any time by
pressing the MEMORY button for at least 3 seconds.
8
MR
Summary of Contents for UAA0XB-A
Page 48: ...IB UAAOXB A Var1 0408 ...
