Page 8
2
Safety information
2.1 Symbols used
This note comprises instructions needed to follow directions, specifications,
proper working procedure and to avoid data loss, damage or destruction of
the instrument.
This note signifies a warning about dangers to life and limb if the apparatus
is handled improperly. Observe these notes and be particularly careful in
these cases. Also inform other users on all safety notes. Besides the notes
in this instruction manual the generally applicable safety instructions and
regulations for prevention of accidents must be observed.
2.2 Safety notes and hints
It is strictly forbidden to open the housing of the ZRS 6060!
If not
observed, all guarantee and liability claims to Proceq SA will be void.
The ZRS 6060 is a high quality, state of the art instrument and is safe to
operate. Nevertheless, risks may occur during improper use.
Every person working with the ZRS 6060 or maintaining the ZRS 6060 must
read and understand the manual completely in particular the safety
precautions and warnings.
The ZRS 6060 is exclusively intended for determination of the night visibility
(coefficient of retroreflection R
A
and R’) of traffic signs, safety garments and
other reflective materials with measurement of three different observation
angles at the same time. Any other use is considered as not being in
accordance with the intentions of the manufacturer. The manufacturer is not
liable for damage resulting from inappropriate application. The user bears
full responsibility.
Never leave the ZRS 6060 under direct sunlight exposure over a longer
period. Always store it in it´s shoulder bag.
Unauthorized modifications and changes of the ZRS 6060 are not allowed.
Unauthorized reproduction is not permitted.
Proceq SA
refuses all warranty and liability claims for damages caused by
usage of the ZRS 6060 in combination with
non-original accessories
, or
accessories from 3
rd
party suppliers.
All maintenance and repair work which is not explicitly allowed and
described in this manual (see chapter 16.1 on page 59) shall only be carried
out by
Proceq SA
or your authorized Proceq agent, failure to comply voids
warranty.
Make sure that the ZRS 6060 is turned off and unplugged before any
maintenance.
For the operation of the ZRS 6060 apply all local safety regulations.
