English
© 2001 PROCEQ SA
Settings
9
Mx: Delete the Lowest and Highest Values
Only possible from EPROM version 2.0. The amount ”m”
of both the lowest and highest values are deleted.
• Under ”m”, enter the number of measured values to be
eliminated. See also the number of test impacts ”n”
set, under ”Mean Value”, page 6.
Example: If ”m” = 3, then at least 12 should be set for ”n”.
4.6
Display Range
The display range for the rebound value R on the display
can be adapted to the testing range.
• Enter R
min
and R
max
.
4.7
Limit Values
The limit marks on the display serve to aid fast recogni-
tion of deviations from the measured values.
The range within which the rebound values R are to lie
can be selected (see Fig. 3.1 ”Measuring display”,
page 5).
The selected limit values are not saved!
• Enter R
min
and R
max
.
4.8
Language
• The display texts can be selected in the language
required.
4.9
Date / Time
The inbuilt clock saves the measured values together
with the test date and time.
Correct the values set, if necessary.
4.10
Data Output
See under ”Data Output”, page 11.
When all the settings have been made on the display
unit, press the END key. The device is ready to continue
with the ”Measuring Process”, page 10.
Bedienungsanleitung DIGI-SCHMIDT 2000.qxd 12.12.2002 16:24 Seite E9