26
© 2012 by Proceq SA
6.8 Edit
Individual values and sections of the potential graph may be edited.
Fig. 6.7: Edit graph screen
Use the A and B cursors to select the values to be edited. Press “Edit”. Four actions are available.
•
Delete the values lying in the area between cursors A and B.
•
Set the values lying in the area between A and B to a specific value.
•
Delete the value to the bottom right of cursor A.
•
Set the value to the bottom right of cursor A to a specific value.
6.9
Additional Functions
•
“Save File” to save your changes.
•
“Print View” prints the currently visible section of the potential map respectively chipping graph.
•
“Print File” prints the entire measurement file, even areas that are not visible in the current view
of the potential map/chipping graph, using as many pages as necessary.
•
“Get BMP” creates a BMP image file of the current view of the potential map or chipping graph
which can be exported to third party software for reporting.
•
“General View” resets the range of the potential map and chipping graph so that the entire graph
is visible again.
•
“Undo” allows the last 10 edits and insertions to be undone.
