© 2014 Proceq SA
11
4.1.3 Memory Mode
The Memory mode of the Zonotip / Zonotip
+
allows to promptly determine the thickness of the test
object, to record the measurement in the memory of the instrument, to browse them on the display
as well as to correct the entries and to conduct re-measurements.
The screen is divided into two parts: the upper part displays information about the measurement,
the lower part shows information about previously saved results.
Up to 500 cells (single measurements) can be stored in up to 100 groups. If the maximum number
of cells in a group is reached, a related information caption will appear on the instrument screen.
To store a measurement, please press
.
1.
Active bookmark of the Memory
mode
2.
Battery charge indicator
3.
Measurement units
4.
Measurement result
5.
Indicator of the measurement
taking method (see chapter 4.2.1)
6.
Indicator of the signal level
(see chapter 4.2.1)
7.
Number of group
8.
Number of measurement
9.
Stored measurement results
Editing Stored Measurements
1. Press the
key to enter the edit mode. The screen will show
.
2. Use the keys to
to select the measurement that needs to be overwritten.
3. Press the
key to start a new measurement.
4. By pressing
, the measured data will be stored (the old data will be overwritten).
5. Press
to exit the edit mode.
Transferring data
Please note that device needs to be in Memory Mode in order to communicate with PC, refer to
section 6. Zonolink
