10
© 2014 Proceq SA
Memory
Clear Memory
14
Run
The % amount represents the used
memory capacity
A-Scan
Scan beginning
15
Edit
for details see 4.3.2
Scan end
16
Edit
for details see 4.3.2
Gate: beginning
17
Edit
for details see 4.3.2
Gate: end
18
Edit
for details see 4.3.2
Gain
19
Edit
for details see 4.3.2
A-Scan type
20
Filled
Empty
4.1.2 Norm Mode
Using the Norm mode is convenient when the measurement results do not have to be recorded.
This mode enables the Zonotip to promptly determine the thickness of the test object and to set
the “monitor” (5) response range. If “monitor” (5) is set to “inside” and the readings are within the
defined limits, the readings are shown in red. If “monitor” is set to “outside” and the readings are
within the defined limits, the readings are shown in white.
1.
Active bookmark of Norm mode
2.
Battery charge indicator
3.
Measurement units
4.
Measurement results
5.
Indicator of the measurement
taking method (see chapter 4.2.1)
6.
Indicator of the signal level (see
chapter 4.2.1)
7.
Current Probe
8.
Lower limit
9.
Upper limit
10.
Current material
11.
US waves velocity in the current
material
