92
I LEFT THE SYSTEM ON, BUT JUST RETURNED AND FOUND IT IN STANDBY.
WHAT IS HAPPENING?
✓
There was probably a power outage while you were away from the
system. During a power failure, the AVP2 saves all of its critical set-
tings to nonvolatile memory. When power is restored, it enters the
standby
mode and waits for your return.
MY VIDEO IS SOMETIMES WASHED OUT, APPEARING IN BLACK AND
WHITE ONLY. WHAT GIVES?
✓
Cause
: The AVP2 can do a full conversion from S-video to com-
posite, making all of the S-video sources available to the composite
outputs of the AVP2 (both main and remote/record). This often
simplifies operation significantly. However, conversion in the other
direction would have added significantly to the cost of the AVP2.
Instead, you get a black and white only rendition of whatever you
are trying to watch if you try to monitor a composite source on the
S-video output.
✓
What to do
: switch to the S-video input on your TV. Assuming it
is connected, you’ll get all of the picture—color as well as black
and white.
Summary of Contents for AVP2
Page 1: ...AVP2 Audio Video Preamplifier Owner s Manual...
Page 99: ...99...
