22
16
CENTER
Pressing this button followed by adjusting the
volume knob
(or
volume
±
on the remote control) will alter the volume of the Center speaker relative
to its normal, calibrated setting. The resulting offset will be indicated in the
main display
, as well as by the
on screen display
, until the volume control
reverts to its normal,
master
mode.
As an example, increasing the center channel volume by three decibels
would result in a
+3.0
being displayed until the volume control reverted to
normal operation, at which point the display would again indicate the over-
all volume setting.
17
SURROUND
Pressing this button once followed by adjusting the
volume knob
(or
volume
±
on the remote control) will alter the relative volume of the sur-
round speakers relative to all others. The resulting offset will be indicated in
the
main display
, as well as by the
on screen display.
If additional surround speakers are defined (either a single back center, or a
pair of back speakers), pressing this button a second time will allow you to
change the offset of the back channel(s).
18
SUB
Pressing this button followed by adjusting the
volume knob
(or
volume
±
on the remote control) will alter the volume of the Subwoofer(s) relative to
all other speakers. The resulting offset will be indicated in the main display,
as well as by the
on screen display
, until the display returns to its normal,
master volume
display.
19
VOLUME KNOB
This knob is used to make most adjustments on the AVP2. While the
vol-
ume knob
normally controls the master volume of the music/home theater
system (
main
path), it can be used in concert with other buttons to control
almost any aspect of system performance (as indicated above), and when
navigating the menu system from the front panel.
Summary of Contents for AVP2
Page 1: ...AVP2 Audio Video Preamplifier Owner s Manual...
Page 99: ...99...