www.procarebv.nl/sp
Batteries
- 8
6
Batteries
The microFET2 uses two 1/2 AA 3.6 Volt Lithium rechargeable
batteries. When the batteries are getting low both displays
will show ‘LO’.
To replace the batteries unscrew the testing pad. Now you see
the batteries. Carefully remove them and put in new ones.
Battery Saver: microFET2 has a self-activating ‘sleep’ mode to
extend battery life when the unit is accidentally left on. The
‘sleep’ mode starts when the power switch is turned on but the
unit has not received any input for three minutes.
There are two ways to wake the microFET2 from it’s sleep mode:
1.
Press the RESET button
2.
Switch off the unit for five minutes or more and put it
back on again
Batteries can be ordered through your local supplier or
www.procarebv.nl/sp
. Article code: 99.LS1425.
