73
GB
Technical data
Mains connection
220 V- 240V~ 50 Hz
Motor power W
max. 1100
Operating mode
S3(15%)
Compressor speed
4300 min
-1
Operating pressure
max. 8 bar
Lubrication type
Oil-free
Theoretical Suction capacity (l/min)
180
Protection type
IP20
Equipment weight in kg 4.7
Sound power level, L
wA
97 dB
The noise emission values were determined
in accordance with EN ISO 3744.
Wear ear protection.
Exposure to noise can cause hearing loss.
Before starting work
Before connecting the device, verify that the
data on the type plate corresponds to the
mains data.
• Check the unit for transport damage.
Immediately report any damage to
the transport company with which the
compressor was delivered.
• The compressor must be set up near the
load that is to be powered.
• Avoid long air piping and long feed lines
(extension cords).
• Make sure that the inlet air is dry and
dust-free.
• Do not set up the compressor in a damp
or wet room.
• The compressor shall be operated in
suitable rooms (well ventilated, ambient
tempe5°C to 40°C) only. The
room must not contain any dusts, acids,
vapors, explosive or in� ammable gases.
• The compressor is suitable for operating
in dry rooms. The compressor must not
be used in areas where splash-water is
used for work.
