probst VM-301-KJ-GREENLINE, Operating Instructions Manual

Page: 43 / 79

Maintenance and care 42 / 43
51500024 V2 GB
7.3 Trouble shooting
DISTURBANCE CAUSE LIFTING
System does not start Lithium-ion batteries are empty Charging Lithium-Ion Batteries
System does not start (when lithium-
ion batteries are fully charged)
12V battery is discharged
Charge 12V battery for operating
voltage
The system is running, but the machine
is not running.
Seat switch is active
Press reset button (horn) 1 x
The handbrake does not work
Brake pads worn out Replace brake pads
Handbrake cable loose Adjust handbrake cable
Machine does not start
Fuse blown Check fuses
Battery defective Check battery
Outrigger cannot be lifted
Hydraulic system has leakage Repair leakage
Too little hydraulic pressure Check oil level
System is running, but machine is not
running
Handbrake is applied Releasing the handbrake
7.4 Repairs
Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
7.5 Safety procedures
•
It is the contractor’s responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (
→
see DGUV regulation 1-54 and DGUV norm 100-500).
•
The corresponding legal regulations and the regulations of the declaration of conformity must be
observed!
•
The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at:
service@probst-handling.com
•
We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert inspection" in a clearly
visible place (order no.: 2904.0056+Tüv sticker with year number) after the inspection has been done.