Maintenance and care
54000034
30 / 32
GB
7.2
Trouble shooting
ERROR
CAUSE
REPAIR
The clamping-power is not big enough,
the load is slipping out
(optional)
The grippers are worn
Replace the grippers
(optional)
The maximum load is exceed
Reduce the weight of. the load
(Adjustment of the gripping range)
(optional)
The actual opening width is not correct
Adjust the gripping range according to
the load you want to transport
(Property of material)
The surface of the material is dirty or
the material is not suitable / allowed for
this device.
Check the surface of the material or ask
the manufacturer, if you the material is
allowed for this device.
Unbalanced load
The device is not loaded symmetrically
Adjust the position of the load
(Adjustment of the gripping range)
(optional)
The adjustment of the gripping range is
not symmetrical.
Correct the adjustment of the gripping
range
Automatic release does not work
mechanical (optional)
Automatic release does not work
Clean automatic release with high
pressure-cleaner
Correct faulty switching (
→
see chapter
“Picture of the automatic release”)
Change the inset of the automatic
release