PROAIM 38ft BASE KIT
6
Attach 3 hooks one after another to four wire tensioners.
Attach one end of 10.6ft cable to one of the hook attached on front side of cable guide and
another end with hook attached to 5th section of jib.
Then attach one end of 18.2ft cable to hook attached on 3rd section and another end with
the 2nd hook attached to cable guide as shown below.
Attach 2 hooks on both slots on cable guide. Then attach three extra hooks to hook attach
to front side and two hooks to hook attached on back side.
Now attach one end of 3.5ft cable to hook on back side and another end to hook on 1st slot
on 9th jib section with the help of wire tensioner.
Attach 4.6ft cable to same hook on cable guide and another end with hook on 2nd slot on
last section as shown below.
ASSEMBLING CABLES
