PROAIM 38ft BASE KIT
4
Install the 9th Section to the rear of the vertical pivot point through bolt, washers and nut.
Tighten the nut properly to secure the section.
ASSEMBLING JIB SECTIONS
Warning:
We have provided double locking precautions on Jib Stand; Pin is the first and pri-
mary locking, knob is the secondary locking, so
first lock the Pin to avoid slipping of stand.
Fix the tripod stand with Spreader and tighten the top ratchet knobs of stand to secure it in
place.
Install the Hub Assembly by sliding the bottom of the hub assembly into
the stand’s Mount opening.
Align the holes of the bottom of hub assembly
with the stand’s mount opening and secure it
with the provided knobs.
Warning:
This is the Pan Friction Knob. Never pan the Jib with this knob
tightened.
If this knob turns while panning, it is too tight. Only tighten while parking
the jib!
INSTALLING THE HUB ASSEMBLY
Pan
Friction
Knob
Note :
The Hub Assembly has several mounting holes. You can mount LCD
Monitor or Joystick box to this assembly if you want.
