Programming
Programming
Set Time
Follow the steps below to set the day of the week and current time:
1.
Press the
MENU
button.
2.
Press
SET TIME.
3.
Day of the week will be flashing. Use the or key to
select the current day of the week.
4.
Press
NEXT STEP.
5.
The current hour is flashing. Use the or key to
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
6.
Press
NEXT STEP.
7.
Minutes are now flashing. Use the or key to
select current minutes.
8.
Press
DONE
when completed.
(If using programming)
Set Program Schedule For Four Time Periods
3.
Press
SET SCHED
.
Note:
Monday-Friday
(Monday if in 7 day)
is dis
played and the
WAKE/ OCC1
icon is shown. You are now programming
the
WAKE/OCC1
time period for that day.
4.
Time is flashing. Use the or key to make your time
selection for that day’s
WAKE/OCC1
time period.
Note:
If you want the fan to run continuously during this time
period, select
ON
with the
FAN
key. If you want to use
IAQ
mode during this time period, select
IAQ
with the fan key.
5.
Press
NEXT STEP.
6.
The setpoint temperature is flashing. Use the or key
to make your setpoint selection for that day’s
WAKE/OCC1
period.
7.
Press
NEXT STEP.
8.
Repeat steps 4 through 7 for that day’s
LEAVE/UNOCC1
time period,
RETURN/OCC2
time period, and
SLEEP/UNOCC2
time period.
To customize your 5+1+1 Program schedule, follow these steps:
Weekday:
(WAKE, LEAVE, RETURN, SLEEP or OCCUPIED 1, UNOCCUPIED1, OCCUPIED 2, UNOCCUPIED 2)
1.
Select
HEAT
or
COOL
with the system switch.
Note:
You have to program heat and cool each separately.
2.
Press the
MENU
button (If menu does not appear first press
RUN SCHED
).
You will see a
TECHSETUP
option after the
MENU
key is pressed.
This
TECH SETUP
key is for installer configuration and should
NOT
be changed unless you consult your professional heating and air
conditioning technician.
Important:
Continued on next page...
