Set Program Schedule For Two Time Periods
1.
Select
HEAT
or
COOL
with the system key.
Note:
You have to program heat and cool each separately.
2.
Press the
MENU
button (If menu does not appear first, press
RUN SCHED
).
3.
Press
SET SCHED
.
Note:
Monday-Friday
( Monday if in 7 day)
is
displayed and the
OCCUPIED
text is shown. You are now program
ming the
OCCUPIED
time period for that day.
4.
Time is flashing. Use the or key to make your time
selection for that day’s
OCCUPIED
time period.
Note:
If you want the fan to run continuously during this time
period, select
ON
with the
FAN
key. If you want to use
IAQ
mode during this time period, select
IAQ
with the fan key.
5.
Press
NEXT.
6.
The setpoint temperature is flashing. Use the or key
to make your setpoint selection for that day’s
OCCUPIED
period.
7.
Press
NEXT.
8.
Repeat steps 4 through 7 for that day’s
UNOCCUPIED
time period.
To customize your 5+1+1 Program schedule, follow these steps:
Weekday:
(OCCUPIED, UNOCCUPIED)
Programming
Programming
Repeat steps 4 through 7 for the Saturday
WAKE/OCC1
time period, for the
Saturday
LEAVE/UNOCC1
time period, for the Saturday
RETURN/OCC2
time period, and for the Saturday
SLEEP/UNOCC2
time period.
Saturday:
Repeat steps 4 through 7 for the Sunday
WAKE/OCC1
time period, for the
Sunday
LEAVE/UNOCC1
time period, for the Sunday
RETURN/OCC2
time
period, and for the Sunday
SLEEP/UNOCC2
time period.
Sunday:
A Note About Auto Changeover:
When in Auto you have the ability to switch between auto heat or auto
cool by pressing the system key. This can be done once the current
mode has reached its setpoint. For example: if in auto heat, the heat
setpoint must be satisfied before the thermostat will allow you to switch
to auto cool. You can switch out of auto by holding down the system
key. To get back into auto, you must toggle the system key to auto.
To customize your 7 day Program Schedule, repeat
steps 4 through 8 for the Tuesday, Wednesday, Thursday,
Friday, Saturday and Sunday time periods.
Continued on next page...
