background image

WARNING!!!  

Do not install the antenna in the vicinity of exposed power lines or other sources of power at 
risk of lightning, you may be killed or seriously injured. Make sure anyone does not even 
come into contact with it accidental during use
Install the antenna on properly dimensioned supports to hold the load even under stormy 
wind conditions.
The fall of all or part of it could hit people and / or things with unrecoverable damages. 

In case, the responsibility is to be solely charged by the user.

This manual is an integral part of the product, keep it handy.

 

  

Dear buyer,

thank you for purchasing a Pro.Sis.Tel antenna ..
Making it we have used the best materials available on the market, worked and finished 
with the best care possible allowed by the state of art.
Use it within the rating for which it was built and will serve you faithfully for many years.
In case of doubts or concerns, our technical department is always ready to provide all the 
necessary help.

If you are satisfied with it tell the others, otherwise ...... tell to us.
Your opinion and your suggestions will help us to improve even more our products.

Best regards
Annamaria Fiume IK7MWR 

Made in Italy

WARNING! Defend the environment

Disposing components and materials

The antenna consists mainly of aluminum, in the event of disposal, conferred the scrap to a specialized

disposal center, in compliance with the requirements of local law. 

Summary of Contents for PST-RD34T

Page 1: ...d of oil or grease is ok Do the same way for the other tubes joints Some inner ends have more holes they will help you in tuning antenna on your preferite band section use the one in the middle for now Make sure to have heach one tubes connection having bolts head on the same side When completed insert on the semi dipole end the trap set Bolt down each one tube joint following the same way used be...

Page 2: ...5 25x75 D6 20x104 D7 16x30 D8 12x80mm D2 has load coil on it D6 has 30m trap on it D6 has 30m tuning steps D8 has 40m tuning steps For constructive requirements individual measurements may undergo variations without changing the final operation Install antenna on your mast make sure to have almost 5 6meters or 15 20 ft over the roof or ground and if installed over an HF yagi antenna make sure to h...

Page 3: ...is advisable not to install it at a height less than 5 m from the roof ground Tuning charts at 10m above the ground Specifications Gain 0 dBd Bands 40m 30m Front side about 15 dBd Impedence 50 ohm ROS within 1 1 5 or better Max power 2KW ssb 1 5Kw cw rtty Reccomeneded balun 50 ohm 1 1 Total lenght about14 25m Weight about 8 kg Wind area about 0 3m2 Mast diameter 40 50mm 60mm on request Max wind 13...

Page 4: ... a Pro Sis Tel antenna Making it we have used the best materials available on the market worked and finished with the best care possible allowed by the state of art Use it within the rating for which it was built and will serve you faithfully for many years In case of doubts or concerns our technical department is always ready to provide all the necessary help If you are satisfied with it tell the...

Reviews: