4
B4
A2x4
A6x4
A3x4
A3x4
A5x4
6
7
Determine the optimum height on the rear pedestal to
attached the (B4) bracket. The best method to do this
is to measure from the center of your television screen
to the bottom most edge of the TV set. This will tell you
the minimum clearance needed on this Universal Base.
The vertical center of the (B4) bracket must be at least 1”
higher from the base than your measurement taken on
your television. This will ensure you have enough clearance
for proper ventilation. It is also important to consider any
TV controls, connections or attached cables that may
require clearance.
Locate four (A5) philips head screws and four (A3) metal
washers. Slide each washer onto the (A8) screw.
Attach the bracket (B4) to the rear pedestals by sliding
the four (A5) screws through the appropriate holes.
Make sure the bracket is horizontally centered.
The (A5) screws will protrude from the rear of the pedestal.
Slide first a plastic washer (A2) then metal washer (A3) onto
each of the screws. Then attach a wingnut (A6) to each of
the screws and tighten until snug.
