8912313
Industrial 4-in-1 Pedestal Fan
V1.0
8
For technical questions call 1-800-665-8685
WALL FAN
1. Secure the short pole (J) to the
wooden wall with the 4 anchor
screws and washers (K) provided.
2. Locate the motor assembly (H) and
insert into the short pole (J).
3. Align the two holes of the short
pole (J) with the motor assembly.
Insert and tighten the 2 screws and
washers (G) securely.
4. Attach two 3-wing plastic knobs
(I) to the fan for adjusting the airflow angle.
CEILING FAN
1. Install the short pole (J) to the ceiling with 4 anchor screws and
washers (K) provided for wooden ceiling tighten them securely.
2. Locate the motor (H) and insert into the
short pole (J).
3. Align the two holes of the short pole (J)
with the motor assembly. Insert and
tighten the 2 screws and washers (G)
securely.
4. Install the safety wire rope (L) to the
ceiling with the screw and. washer
securely.
5. Attach two 3-wing plastic knobs (I) to
the fan for adjusting the airflow angle.
OPERATION
1. Position the fan.
2. Tilt the fan head to the desired angle after loosening the pivot arm
knobs. Tightening the knobs to fix the fan head in place.
3. Plug the power cord into the power supply.
4. Rotate the selector switch to 0 (OFF), 1 (Low), 2 (Medium) or 3
(High) as desired.
5. Turn fan off by rotating selector switch to 0 (OFF).
Fig. 3
Fig. 4
