8912313
Industrial 4-in-1 Pedestal Fan
V1.0
6
For technical questions call 1-800-665-8685
2. Do not operate this tool if the power cord is frayed, damaged or
poorly spliced, as an electric shock may occur, resulting in personal
injury or property damage.
2.1 Inspect the tool's power cord for cracks, fraying or other faults
in the insulation or plug before each use.
2.2 Discontinue use if a power cord feels more than comfortably
warm while operating the tool.
3. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch the plug with wet hands.
4. Prevent damage to the power cord by observing the following:
4.1 Do not pull on the cord to disconnect the plug from an outlet.
4.2 Keep the cord away from heat, oil, sharp edges or moving parts.
4.3 Never use the cord to carry the tool.
4.4 Place the electrical cord in a position that prevents it from coming
into contact with the tool and getting caught by the workpiece.
The cord should always stay behind the tool.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
5.1 Position power cords away from traffic areas.
5.2 Place cords in reinforced conduits or place planks on either
side of the power cord to create a protective trench.
6. Do not run the cord under carpeting or cover with throw rugs,
runners or similar coverings. Covering that cord may result in the
tool overheating and starting a fire.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage.
