V1.0
20 in. Industrial 4-in-1 Pedestal Fan
8912313
Visit www.princessauto.com for more information
7
ASSEMBLY & INSTALLATION
STANDING FAN
1. Attach outer pole (A) to the base (B) with
the 4 screws and spring washers (C).
2. Loosen the plastic nut (D) on outer pole
and extend inner pole (E) to desired
height.
3. Tighten the plastic nut fully so the inner
pole cannot move.
4. Slide cover ring (F) down the outer pole
to rest on top of the base.
5. Slide the pivot arms on the motor
assembly (H) onto the end of the inner
pole.
6. Tighten the 3-wing plastic knobs (I) to
hold the pivot arms in place.
FLOOR FAN
1. Attach short pole (J) to the base (B) with the
4 screws and spring washers (C).
2. Slide cover ring (F) down to short pole (J)
and rest on the top of base (B).
3. Locate the motor assembly (H) and insert
into the short pole (J).
4. Align the two holes of the short pole (J) with
the motor assembly. Insert and tighten the
two screws & washers (G) securely.
5 Attach two 3-wing plastic knobs (I) to the
pivot arms for adjusting the airflow angle.
The fan can be mounted on a wooden wall or ceiling. Ensure the
location can support the weight (20 lb) of the fan. The installation
should be mounted by a qualified electrician.
Fig. 1
Fig. 2
