V1.0
Solar Auto-Darkening Welding Helmet
8819864
With Blue Lens Technology
Visit www.princessauto.com for more information
5
WARNING! Using filter forms from any other manufacturer’s
helmet can seriously impaired the protection provided and may
result in serious personal injury.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. This auto-darkening welding helmet is not recommended
for overhead welding applications, laser welding or laser
cutting applications.
3. This welding helmet is not suitable to laser welding and oxy-
acetylene welding.
4. In the event of electronic failure, the filter remains dark at
Shade 15 to protect against UV and IR radiation.
5. Use the auto-darkening welding filter with inner and outer
cover lenses. Never open or tamper with the filter cartridge.
6. Ensure the front cover lens is mounted before use. Remove
the protective film.
7. Ensure that the lens is clean and there is no dirt or spatter
covering the four sensors at the front of the filter cartridge.
8. Inspect all parts for signs of wear or damage. Any scratched
or cracked parts should be replaced prior to use.
9. Never place the helmet on a hot surface.
10. Arc rays can burn both eyes and skin. Arc welding produces
intense visible and invisible (ultraviolet and infrared) rays.
Wear a welding helmet fitted with the proper shade to
protect your face and eyes when welding or watching.
11. Check whether welding or grinding mode is chosen
before use.
12. The reaction of the filter’s liquid crystal will be slower if
the ambient temperature is low, but it will not affect
protective functions.
