![background image](http://html1.mh-extra.com/html/pro-point/8712952/8712952_user-manual_1607387006.webp)
8712952
HITCH MOUNT VISE PLATE
V1.0
6
For technical questions call 1-800-665-8685
4. Insert the bolt through one of the clamps (#8). Set aside
within reach.
5. Slide the shaft of the vise mount plate (#12) into the receiver
tube’s opening. Choose one of the multiple mounting holes
and align it with the bolt hole in the receiver tube.
6. Insert the bolt with the clamp through the receiver tube
and vise mount plate bolt holes. The clamp’s lips are at the
top and bottom and face towards the receiver tube.
7. Insert the remaining clamp (#8) over the bolt, also
facing inward.
8. Secure with the flat washer (#9), spring washer (#10) and
M12 nut (#11).
9. Tighten all bolts and nuts.
MOUNTING THE VISE
IMPORTANT! Hardware to mount the vise to the mount plate
is not included.
10. The diagonal mounting slots on the vise mount plate are
2 in. long and 5/8 in. wide.
11. Align the bolt holes of the vise over the bolt holes of the
mount plate.
12. Insert bolts through the vise and mount plate bolt holes.
Place a flat washer and spring washer over the bolt, then
secure hand-tight with a nut. Once all bolts are in place,
tighten them with a wrench.
MOUNTING BRACKET
Attach the bracket to a workbench.
13. Place the bracket (#13) on the workbench so the receiver
tube will clear the table edge.
14. Drill holes into the table using the bracket bolt holes as
a guide.