![background image](http://html.mh-extra.com/html/pro-point/8553521/8553521_user-manual_1607345010.webp)
8553521
6,000W SHOP HEATER
V1.0
10
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
WARNING! There are no parts that require user maintenance.
Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user
and/or others.
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3. Maintain the tool’s labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
CLEANING
Do not use cleaning liquid or other chemicals to spray on the unit.
1. Disconnect power supply at source. Switch off the circuit
breaker.
2. Wait 60 minutes to ensure the heating element has cooled
down. Your heater is now ready for cleaning.
3. Remove interior dust with a vacuum cleaner. Use the
crevice tool attachment.
4. Clean the exterior with a slightly damp cloth. Allow the unit
to dry completely before using it.
WARNING! Do not allow water to run into the interior of the
heater, as this could create a fire or electric shock hazard,
damaging the unit.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or
by-laws for electronic devices, batteries, oil or other toxic liquids.