![background image](http://html.mh-extra.com/html/pro-point/8510851/8510851_user-manual_1607422008.webp)
8510851
Variable Shade Auto-Darkening Welding Helmet
V1.3
DELAY TIME
Delay time refers to the time the cartridge filter is set to change from
the dark to bright state after welding stops. The delay can be adjusted
(#B1) up to a one second delay.
1.
The minimum delay is set between 0.1 to 0.25 seconds, suitable
for spot or short welds.
2.
The maximum delay time is set between 0.85 to 1.0 second,
suitable for heavy current welding or when visible light is
produced.
3.
Selections between minimum and maximum are suitable to most
indoor and outdoor welding operations.
SENSITIVITY
The sensitivity control (#B2) is set according to the welding process and
ambient light.
1.
Low Setting - suitable for high amperage welding and welding in
areas with high levels of natural sunlight.
2.
Medium Setting - suitable for most indoors and outdoors
welding.
3.
High Setting - suitable for low amperage welding and welding in
areas with low light conditions, especially for low amperage
argon-arc welding.
SELF-TEST
1.
Set the filter shading number anywhere
between 9 and 13.
2.
Press the TEST button (#B4) to see if it
switches to the dark state.
3.
Release the Test button to check that the
filter returns to the bright state.
GRINDING MODE
The welding helmet can also be used to protect the face during
grinding. Switching to Grind mode (#B3) will prevent the filter cartridge
from darkening when bright sparks are created.
Fig. 4
8
For technical questions call 1-800-665-8685