![background image](http://html.mh-extra.com/html/pro-point/8354482/8354482_user-manual_1607376008.webp)
3/8" Heavy-Duty Air Ratchet
8
For technical questions call: 1-800-665-8685
8354482
V 1.0
UNPACKING
WARNING! If any part is missing, do not operate the tool until the missing parts are replaced. Failure to do so
could result in serious personal injury.
1. Carefully remove the parts and accessories from the box.
2. Make sure that all items listed in the parts lists are included.
3. Inspect the parts carefully to make sure the tool was not damaged while shipping.
4. Do not discard the packaging material until you have carefully inspected and satisfactorily operated the tool.
OPERATION
WARNING! Ensure you read, understand and apply safety instructions before use.
1. Prepare a standard 1/4" air connector for use with your tool. Before connecting the tool to the air supply, wrap
the threaded portion of the air connector with thread tape. Connect the 3/8" I.D. hose to the quick connector
and then to the tool.
Note:
If you are not using an in-line oiler, add a few drops of air tool oil in the tool's air inlet before use. In the
same manner, add a few drops after every hour of use.
2. Set the air pressure regulator on the air compressor to 90 PSI. Do not exceed the tool's recommended air
pressure. Excess pressure could result in damage to the tool, to your work piece or serious injury.
3. Check the air line and its connections for air leaks. Do not use this tool until you have repaired all air leaks.
Note:
Turn off the air compressor, disconnect the air pressure hose and discharge any residual pressure inside
the tool before changing accessories or making any adjustments to the tool. Failure to do so could result in
severe injury, tool or property damage.
4. Select the appropriately sized 3/8" drive impact socket for the job.
5. Push and snap the socket onto the anvil.
MAINTENANCE
WARNING! Disconnect tool from air supply before changing accessories, servicing or performing maintenance.
Replace or repair damaged parts.
1. Lubricate the ratchet daily with a few drops of air tool oil dripped into the air inlet.
2. When not in use, disconnect the tool from its air source, discharge any residual air pressure, clean the ratchet
and store it in a secure location, away from children.
Summary of Contents for 8354482
Page 1: ...User Manual 8354482 V 1 0 3 8 Heavy Duty Air Ratchet Please read this manual before use ...
Page 2: ......
Page 12: ......
Page 14: ......