Pro-Logix 141-215-000 Operator'S Manual Download Page 2

IMPORTANT SAFETY INSTRUCTIONS - READ THESE FIRST  

A

WARNING

Read these instructions completely before using the Battery Charger and save them for future 
reference. Before using the Battery Charger to charge a battery, read these instructions and the 
instruction manual/safety information provided by the car, truck, boat or equipment manufacturer. 
Following all manufacturers’ instructions and safety procedures will reduce the risk of accident.

Working around lead-acid batteries may be dangerous. Lead-acid batteries release explosive gases 
during normal operation, charging and jump starting. Carefully read and follow these instructions for 
safe use. Always follow the specific instructions in this manual and on the Battery Charger each time 
you use the Battery Charger.
All lead-acid batteries (car, truck and boat) produce hydrogen gas which may violently explode in the 
presence of fire or sparks. 

Do not smoke, use matches or a cigarette lighter while near 

batteries.

 Do not handle the battery while wearing vinyl clothing because static electricity sparks are 

generated when vinyl clothing is rubbed. Review all cautionary material on the Battery Charger and 
in the engine compartment.

This battery charger is equipped with a setting for charging a specific type of lithium battery 
chemistry, Lithium Iron Phosphate (LiFePO4). The charger's lithium charging function is optimized 
for this type of lithium battery only, as noted on the control panel. There exist many different lithium 
battery types, each using a different specific lithium battery chemistry. Do not charge any other 
lithium battery types using this charger – doing so could result in personal injury and/or property 
damage. 

Always wear eye protection, appropriate protective clothing and other safety equipment when 
working near lead-acid batteries. Do not touch eyes while working on or around lead-acid batteries.

Always store clamps away from each other or common conductors. Improper storage of clamps may 
cause the clamps to come in contact with each other, or a common conductor, which would be 
hazardous if the Battery Charger was plugged into an AC outlet.

Use extreme care while working within the engine compartment, because moving parts may cause 
severe injury. Read and follow all safety instructions published in the vehicle's Owner's Manual.

Batteries being charged with the Battery Charger unit likely contain liquid acids which are hazardous 
if spilled.

WARNING:

 Changes or modifications to this unit not expressly approved by the party responsible for compliance  

could void the user’s authority to operate the equipment. 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiver antenna.

- Increase the separation between remote and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Summary of Contents for 141-215-000





























Reviews: