Pro Lite E32-A, User Manual

Page: 15 / 21

Pro-Lite, Inc.
E32-A user manual
14
1 1 8N1 (equal to 00)
5 4 3 TTL UART baud rate （ bps ）

UART baud rate can be different
between communication parties

The UART baud rate has nothing
to do with wireless transmission
parameters & won’t affect the
wireless
transmit / receive
features.
0 0 0 1200
0 0 1 2400
0 1 0 4800
0 1 1 9600 (default)
1 0 0 19200
1 0 1 38400
1 1 0 57600
1 1 1 115200
2 1 0
Air data rate （ bps ）

The lower the air data rate, the
longer the transmitting distance,
better
anti-interference
performance and longer
transmitting time

The air data rate must keep the
same for both communication
parties.
0 0 0 2.4k
0 0 1 2.4k
0 1 0 2.4k (default)
0 1 1 4.8k
1 0 0 9.6k
1 0 1 19.2k
1 1 0 19.2k (same to 101)
1 1 1 19.2k (same to 101)
General Specifications Except for E32 (400T20S)
4 CHAN
7 6 5 reserved Write 0
Communication channel
16H-19H, correspond to
432~435MHz
4-0, channel (410M + CHAN*1M), default 17H （ 433MHz ）
5
OPTIO
N
7 Fixed transmission enabling bit （ similar to MODBUS ）

In fixed transmission mode, the
first three bytes of each user's data
frame can be used as high/low
address and channel. The module
changes its address and channel
when transmit. And it will revert
to original setting after complete
the process.
0 Transparent transmission mode
1 Fixed transmission mode
6 IO drive mode (default 1)

This bit is used to the module
internal pull-up resistor. It also
increases the level’s adaptability
in case of open drain. But in
some cases, it may need external
pull-up resistor.
1 TXD and AUX push-pull outputs, RXD pull-up inputs
0
TXD 、 AUX open-collector outputs, RXD open-collector
inputs
5 4 3 wireless wake-up time

The transmit & receive module
work in mode 0, whose delay time
is invalid & can be arbitrary value.

The transmitter works in mode 1
0 0 0 250ms (default)
0 0 1 500ms
0 1 0 750ms