To engage the thruster, press the on/off switch; the LED light will glow. To move the boat to port, turn the
joystick to the left and press the left arrow button. To move the boat to starboard, turn the joystick to the
right and press the right arrow button. When the thruster is engaged, the LED light in the switch will glow.
When the thruster is not in use, make sure to disengage the thruster by pressing the on/off switch on the
joystick panel; the LED light not glow.
The bow thruster is powered by its own dedicated battery (not included or factory installed), which is
installed under the cabin V berth. It is wired to a battery switch that is installed in the storage
compartment below the dinette seat. The battery charger charges this battery.
Refer to the owner’s manual that was provided by the manufacturer of the bow thruster for operational
procedures and information related to the care and maintenance of their product. When in doubt, always
defer to the bow thruster manufacturer’s instructions and/or recommendations.
16
