29
Rod Holder Storage
The following rod holder storage is available:
•
Rod Holders with Inserts – Two pairs of stainless steel rod holders with PVC inserts to protect
your rods are installed on the gunwales.
•
Rod Racks - A pair of rod racks is installed in the port and starboard freeboard of the aft cockpit.
Combined, they can accommodate up to 8 fishing rods.
•
Four aluminum rod holders are installed on the optional T-top frame.
•
Outriggers (Optional) - This option requires the installation of the optional rigid T-top frame. The
outrigger installation includes a pair of outrigger bases, poles and lines. The bases are
constructed of anodized aluminum and are installed on each side of the optional T-top frame.
Turn the handle at the bottom of the outrigger base to rotate the outriggers 90 degrees (from the
side to the aft end of the boat).
Hardware
Cleats
Your boat is equipped with 1 standard and 6 pop-up cleats. They are installed to provide areas to permit you to
tie off the boat at dockside, tie off to another boat that is anchored, secure bumpers/fenders, and/or tie off the
anchor (when dropped) to prevent the line from pulling on the windlass, etc. You should never use the cleats for
towing another boat or skier.
Bow Rail
The low profile bow rail is constructed of stainless steel. The railing, which is through bolted to the gunwale, is
provided for safety. Never use the bow rail to tie off to anything heavier than a bumper/fender. Do not use the
bow rail for anchoring, or to tie off to the dock or another boat. Do not use the bow rail to tow another boat or
skier. Never stand on the bow rail or use it as leverage when pulling up an anchor, a fish or any other objects.
Do not use the bow rail to tie off and/or secure a large catch, etc.
Gunwale Trim / Rubrail
A white rigid vinyl gunwale trim with a stainless steel insert is installed at the juncture of the deck and hull. This
durable trim provides a nice clean look and serves as somewhat of a cushion when you are docking, coming
along side another vessel, etc.
See the Service and Care section of this manual for cleaning recommendations.
Grab Rails
A stainless steel grab rail has been installed at the transom to provide safe boarding on the boat. Depending
upon your helm seat selection, additional grab rails may also be installed on either side of the seat.
Dive Platform - Integrated with Ladder
An integrated Euro style dive platform is built into the fiberglass construction of the deck and hull and includes a
stainless steel ladder on the port side of the transom.
An optional dive ladder (single engine installations only) can be installed on the starboard side of the dive platform
to allow additional boarding capability. When factory installed, this option includes the installation of an additional
grab rail on the transom. With the engines tilted down, passengers can move easily through the transom door
and across the large dive platform to the optional ladder.
Thru Hull Fittings
Thru hull fittings provide overboard drainage. The following photos indicate the source of drainage for each of the
thru hulls.
Summary of Contents for 2009 26 Super Sport
Page 2: ...ii...
