The hose on the lower port feeds raw water to the washdown
pump. To operate the baitwell pump, locate the baitwell switch
on the console and press the switch to the forward position to
turn on the pump.
When the baitwell pump is operating, go to the baitwell tub,
open the baitwell lid and visually check to see if water is
pumping into the tub through the aerator fitting to ensure that the
baitwell pump is working properly. To turn the baitwell pump off,
press the baitwell switch to the aft position. You should always
turn the baitwell switch off at the helm if the pump is not going to
be used soon.
Baitwell
Pump
Seacock lever
is in the
closed
position
Seacock is
below
(hidden) the
seacock lever
Standard Baitwell Tub - The 20-gallon capacity baitwell tub is located at
the starboard aft corner of the cockpit and comes equipped with an
aerator head, a stand pipe and a baitwell light.
If you find it necessary to run the baitwell pump while you are underway,
you may be forcing more water than necessary up through the seacock.
In this instance, adjust the seacock lever to a 45 degree angle so that the
seacock is only halfway open. The seacock lever may require additional
adjustments to find a setting that works best for you. Even when the
baitwell pump is turned off, if the seacock is open, the baitwell tub will
continue to fill with water while you are underway
Optional Leaning Post Baitwell – One of the optional helm seats includes a 25-gallon baitwell tub that is plumbed
to the existing baitwell pump. When this option is selected, the standard baitwell tub is not connected to the
baitwell pump and the standard tub becomes a storage compartment, cooler, etc.
Washdown Pump
The washdown pump is
mounted on the starboard stringer and is equipped with a pressure switch. This pump
shares the same seacock as the baitwell pump and is accessible via the bilge hatch
Before operating the washdown pump, make sure that the seacock at the baitwell pump is in the open position
before turning on the pump. The seacock is wide open when the seacock lever is in the vertical position. When
the seacock lever is in the horizontal position, the seacock is closed. The seacock should remain closed when
the baitwell and/or washdown pumps are not in use.
Washdown Pump
Washdown Fitting (Closed)
Washdown Fitting (Open)
The washdown fitting is located in the port aft corner of the cockpit. Just turn the black cap to open the fitting and
connect a standard garden hose to the fitting.
To turn on the washdown pump, locate the washdown switch on the instrument panel and press the switch to the
forward position. If you turn on the washdown pump switch and you do not feel pressure, the seacock may not be
22
Summary of Contents for 2009 26 Super Sport
Page 2: ...ii...
