Bow Rail
The low profile bow rail is constructed of stainless steel. The railing, which is through bolted to the
gunwale, is provided for safety. Never use the bow rail to tie off to anything heavier than a
bumper/fender. Do not use the bow rail for anchoring, or to tie off to the dock or another boat. Do not
use the bow rail to tow another boat or skier. Never stand on the bow rail or use it as leverage when
pulling up an anchor, a fish or any other objects. Do not use the bow rail to tie off and/or secure a large
catch, etc.
Gunwale Trim / Rubrail
A white rigid vinyl gunwale trim with a stainless steel insert is installed at the juncture of the deck and hull.
This durable trim provides a nice clean look and serves as somewhat of a cushion when you are docking,
coming along side another vessel, etc.
See the Service and Care section of this manual for cleaning recommendations.
Grab Rails
A stainless steel grab rail has been installed at the transom to provide safe boarding on the boat.
Depending upon your helm seat selection, additional grab rails may also be installed on either side of the
seat.
Hawse Pipes
A pair of hawse pipes is installed on the gunwales near the transom. When tying off to the dock or
another boat, you may run the line through the hawse pipe and tie off to the cleat below. When doing so,
take care not to damage the upholstery on the cockpit bolster.
Bow Pulpit w/Anchor Roller and Rope Locker Storage
We have installed an aluminum
anchor roller at the bow pulpit. The
anchor line can be secured inside
the anchor locker and then routed
through the windlass (optional
equipment) and/or anchor roller. The
anchor (not included as standard
equipment) is held on the line
beneath the anchor roller. This
allows you to move about the bow
area safely without tripping over the
line or anchor.
Dive Platform - Integrated w/Ladder
An integrated Euro style dive platform is built into the fiberglass construction of the deck and hull and
includes a stainless steel ladder on the port side of the transom.
An optional dive ladder (single engine installations only) can be installed on the starboard side of the dive
platform to allow additional boarding capability. When factory installed, this option includes the
installation of an additional grab rail on the transom. With the engines tilted down, passengers can move
easily through the transom door and across the large dive platform to the optional ladder.
Fire Extinguisher Holder
Each 24 Super Sport comes with a fire extinguisher holder installed in the port aft corner of the cockpit. It
is located within easy reach of the seat at the transom and just a few feet away from the helm seat.
30
