Lighting Systems
Baitwell Light
The baitwell light switch is located on the switch panel and is labeled baitwell with a light symbol on the
switch. To turn on the baitwell light, press the switch forward and open the baitwell lid to see if the
baitwell light is on. Press the baitwell light switch to the down or aft position to turn off the light.
Cabin Light - Head
The cabin light switch provides power to the round light that is located in the head. To operate the light in
the head, depress the cabin light switch on the console to the forward or on position. The light can then
be turned on or off from inside the head by depressing the small button on the base of the light assembly.
Cockpit Lights (Optional)
The cockpit lights are small circular lights located at the base of the console
near the helm seat. Locate the 2-way cockpit light switch on the switch panel
and press the switch in the forward position to turn on the cockpit lights. Press
the cockpit light switch in the back or aft position to turn the lights off.
Navigation and Anchor Lights
The navigation and anchor lights are required to be used for operation at night or under low visibility
conditions to indicate your position to other boaters. Visually verify the operation of your navigation and
anchor lights and verify that the lights are free from obstructions. You should check your navigation lights
monthly during optimum visibility conditions.
•
When you are underway in low visibility conditions, you should have the Nav/Anc switch
in the up or forward position. This will activate the navigation lights, as well as your
anchor light.
•
When you are anchored or in low visibility conditions, you should turn on the anchor light.
Press the Nav/Anc switch to the down or aft position to turn on the anchor light.
The navigation lights consist of a pair of lights that are mounted at the bow of
the boat. The red light is installed on the port side and the green light is
installed on the starboard side.
The U.S. Coast Guard requires that the anchor light be installed at the highest
point on the boat and must be secured in the up position when you are
underway. Therefore, this light will be installed as follows based upon the
optional top that you may have selected:
•
Bimini top - Light will be installed on the Bimini top frame
•
Rigid T-top – Light will be mounted on the center of the T-top.
Remote Spot Light (Optional)
The installation of the remote spot light requires the optional rigid T-top. The remote spot light is mounted
to the forward area of the T-top. To operate the remote spot light, locate the remote spot light panel that
is installed on the console.
The switch on the right side of the panel allows you to turn the light on and off. The red LED light located
in the center of the panel will be lit when the spot light is turned on. Once the spot light is turned on, the
all around toggle lever (on the left side of the panel) can be moved in an up, down, left or right position to
rotate the light assembly in the desired direction.
19
