Technical data
Mains voltages 100-240VAC
Outboard power supply 20V/3A DC (3pole miniXLR connector)
Power consumptions <1 watt stand-by, 800/300mA (tube/solid)
Dimensions 205Wx200(210)D x70H (with sockets), weight 1010g
Remote batteries CR2025
Digital inputs 1 x RJ-45 differential I2S for CD Box RS in Sonic2 Srambling Mode – 176.4kHz
2 x Coaxial S/PDIF – 24bits/192kHz
4 x Optical S/PDIF – 24bits/96kHz
1 x Coaxial Balanced AES/EBU – 24bits/192kHz
1 x USB B
Precision clock output 1 x BNC; 16,9344MHz for use with Pro-Ject CD Box RS
Analogue outputs 1 pair of RCA/Cinch
1 pair of XLR
Output Voltage Max 4/2Veff (XLR/RCA)
THD 0,005%/0,25% (solid/tube)
D/A-converter Double Texas Instruments PCM1792, 8x oversampling design
Sampling rates 32/44,1/48/88,2/96/176,2/192kHz
Frequency response 20Hz - 50kHz (+0/-1dB)
Signal to Noise ratio 100dB
Tube 6922
Pro-Ject CD Box RS User´s manual, 6.3.2014
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact
your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or
change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the
lawful rights of the customer.
Copyright
Pro-Ject is a registered trademark of H. Lichtenegger.
The information was correct at the time of creating this manual. The manufacturer reserves the right to make changes to the
technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact
your dealer for further advice. Only when the problem cannot be resolved there, the unit should be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use. Modification or
change to any part of the product by unauthorized persons release the manufacturer from any liability over and above the
lawful rights of the customer.
Copyright
Pro-Ject Audio Systems is a registered trademark of H. Lichtenegger.
The information was correct at the time of creating this manual. The manufacturer reserves the right to make changes to the
technical specification without prior notice as deemed necessary to uphold the ongoing process of technical development.
