background image

26

Most treadmill problems can be solved by follow-
ing the simple steps below. Find the symptom that 
applies, and follow the steps listed. If further assis-
tance is needed, see the front cover of this manual. 

SYMPTOM: The power does not turn on

a.   Make sure that the power cord is plugged into a 

surge suppressor, and that the surge suppressor 
is plugged into a properly grounded outlet (see 
page 15). Use only a surge suppressor that meets 
all of the speci

 cations described on page 15. 

IMPORTANT: The treadmill is not compatible 
with GFCI-equipped outlets and may not be 
comaptible with AFCI-equipped outlets.

b.   After the power cord has been plugged in, make 

sure that the key is inserted into the console. 

c.   Check the power switch located on the treadmill 

frame near the power cord. If the switch protrudes 
as shown, the switch has tripped. To reset the 
power switch, wait for 

 ve minutes and then press 

the switch back in. 

SYMPTOM: The power turns off during use

a.   Check the power switch (see the drawing above). 

If the switch has tripped, wait for 

 ve minutes and 

then press the switch back in.

b.   Make sure that the power cord is plugged in. If the 

power cord is plugged in, unplug it, wait for 

 ve 

minutes, and then plug it back in.

c.   Remove the key from the console, and then 

reinsert it.

d.   If the treadmill still will not run, please see the front 

cover of this manual.

SYMPTOM: The console displays remain lit when 
you remove the key from the console

a.     The console features a display demo mode, 

designed to be used if the treadmill is displayed in 
a store. If the displays remain lit when you remove 
the key, the demo mode is turned on. To turn off 
the demo mode, hold down the Stop button for a 
few seconds. If the displays are still lit, see THE 
INFORMATION MODE on page 23 to turn off the 
demo mode.

SYMPTOM: The displays of the console do not 
function properly

a.   Remove the key from the console and 

UNPLUG 

THE POWER CORD.

 Remove the three #8 x 

1/2" Screws (1) and the two #8 x 3/4" Screws (2). 
Carefully pivot the Motor Hood (65) off.

TROUBLESHOOTING

Reset

Tripped

c

65

2

2

a

1

Summary of Contents for Power 795





































Reviews: