7
STEP 4
Install the saddle (7) to the Horizontal seal post (31) with
Multifunctional wrench.
Then tighten the Horizontal seal post (31) on the Saddle
supporting tube (6) with Flat washer(19),Nut (20). Last, in-
sert the Saddle supporting tube (6) to the Main frame (1)
and tightly with Knob bolt (28) .
Note:
1.
You can control the Knob bolt (28) to adjust the ap-
propriate height which is suitable for you .
2.
Before use the bike, please make sure that the Sad-
dle(7) have locking on the Horizontal seal post (31).
STEP 5
Attach the Pedals (10L/R) to the Cranks (35L/R) of the Main
Frame (1).
Note: The left pedal (10L) should be tighten in the counter-
clockwise direction, the right pedal (10R) should be tighten
in the clockwise direction.
STEP 6
Connect the Sensor connective wire (21) and Pulse wire
(27) with the Computer wires correspondingly. Then fix the
Computer (9) on the computer bracket with the Flat washer
(33) and Screw (34) .
Now, your machine is ready for use.
