Pro-Form PFIVEL81802.0, User Manual

Page: 7 / 20

7
STEP 3
I. Slide the lower swing
bar Left and Right (21) onto
the Rotation Rod (27) and
secure using 2 coated Allen
Bolts (17), 2 spring wash-
ers (18), 2 flat washers (15)
tighten fully.
II. Fit the upper swing
bar Left and Right (12) by
slotting them into the top
of the lower swing bar Left
and Right (21) and secure in
place using 4 Allen bolts (14)
and 4 spring washers (15)
tighten fully.Put on the up-
per central shaft cover(20)
on to joint use 4self-tapping
screw(22),and use self-tap-
ping screw (22) to lock the
central shaft cover.
III. Fasten footplate sup-
port bars (36R+L) from the
crank with coated Allen bolts
(17), spring washers (15)
and flat washers (13).
Secure the plastic cover (33) onto footplate support bar with screw(34).
IV. Fasten footplate support bars (36R+L) to the lower swing bars (21R+L) with Allen bolts (35) and se-
cure it with washers (41) and nylon lock nuts (40). Then put the plastic cover (33) onto footplate support bar
left and right with 8 screws (34)
STEP 4
Fasten right footplate (44R) with carriage bolts
(43) from the right footplate support bar (36R)
and secure it with washers (77), spring wash-
ers (78) and knobs (79) tightly. Do the same
for the left pedal.
17 15
18
20LR
22
15
14
13
12L
12R
20LF
21L
23
22
24F
24R
25
21R
27
33L
35
41
40
33R
34
36L
36R
70
15
17
84
85
44R
43
77
79
78