background image

14

HOW TO LEVEL THE EXERCISE BIKE

If the exercise bike 

rocks slightly on your 

floor during use, 

turn one or both of 

the leveling feet (A) 

beneath the rear 

stabilizer until the 

rocking motion is 

eliminated.

HOW TO ADJUST THE ANGLE OF THE SADDLE

You can adjust the angle of the saddle to the position 

that is most comfortable. You can also slide the saddle 

forward or backward to increase your comfort or to 

adjust the distance to the handlebar.

To adjust the saddle, 

loosen the nuts (B) 

on the saddle clamp 

a few turns, and then 

tilt the saddle upward 

or downward or slide 

the saddle forward 

or backward to the 

desired position. 

Then, retighten the nuts.

HOW TO ADJUST THE HORIZONTAL POSITION OF 

THE SADDLE

To adjust the position 

of the saddle, loosen 

the carriage handle 

(C) a few turns, and 

then move the saddle 

forward or backward 

to the desired posi-

tion. Then, firmly 

tighten the carriage 

handle.

Note: The carriage handle (C) functions like a ratchet. 

You can turn the carriage handle in the desired direc-

tion, pull it outward, turn it in the opposite direction, 

push it inward, and then turn it in the desired direction 

again. You can repeat this process as many times as 

desired.

HOW TO ADJUST THE SADDLE POST

For effective exercise, the saddle should be at the 

proper height. As you pedal, there should be a slight 

bend in your knees when the pedals are in the lowest 

position. 

To adjust the 

height of the 

saddle post, first 

loosen the adjust-

ment handle (D) 

four turns and 

pull it outward. 

Next, move the 

saddle post 

upward or down-

ward, release the 

adjustment handle 

into an adjust-

ment hole in the 

saddle post, and 

firmly tighten the 

adjustment han-

dle four turns. 

Make sure that the adjustment handle is engaged 

in an adjustment hole. Then, pull the adjustment 

handle outward, turn it so that it points downward as 

shown, and then release it.

A

A

B

C

D

HOW TO USE THE EXERCISE BIKE

Summary of Contents for PFEX39420-INT.0





























Reviews: