background image

16

HOW TO PLUG IN THE POWER CORD ON THE
LIGHT THERAPY POD

This product must be grounded. 

If it should mal-

function or break down, grounding provides a path of
least resistance for electric current to reduce the risk
of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. 

Plug the power cord into an appro-

priate outlet that is properly installed and ground-
ed in accordance with all local codes and ordi-
nances.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug 
illustrated in drawing 1 below. A temporary adapter
that looks like the adapter illustrated in drawing 2 may
be used to connect the power cord to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded
outlet is not available. 

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician. 

The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. 

Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified 
electrician to determine if the outlet box cover is
grounded before using an adapter.

HOW TO USE THE LIGHT THERAPY POD

The light therapy
pod allows you
to enjoy the ben-
efits of light ther-
apy while you
exercise or while
you simply relax. 

The effective-
ness of light ther-
apy depends on
two factors: your
distance from the
light and the length of time you use the light. The chart
below shows the intensity of the lights at different dis-
tances.

Light

Therapy

Pod

DANGER:

Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service
representative if you are in doubt as to
whether the product is properly grounded. Do
not modify the plug provided with the prod-
uctÑif it will not fit the outlet, have a proper
outlet installed by a qualified electrician.

1

Grounded Outlet Box

Light Cycle

Power Cord

Grounding Plug

Grounding Pin

Grounded Outlet

2

Grounded Outlet Box

Adapter

Lug

Metal Screw

Grounding Pin

Grounding Plug

Distance

12Ó

18Ó

24Ó

Lux

10,000

3,200

2,500

1,500

WARNING: Before beginning this or any light
therapy program, consult your physician.

WARNING: The light therapy pod becomes
hot during use. Allow the light therapy pod
to cool before touching it.

Summary of Contents for Light Cycle PFRX35390



















Reviews: