12
6. Pull the indicated Knob (9), insert the Backrest
Bracket (6) through the rear bracket (A) on the
Bench Frame (1), and then release the Knob
into one of the adjustment holes in the Backrest
Bracket.
See the inset drawing. Tighten an M6 x 10mm
Screw (35) into the small hole in the end of the
Backrest Bracket (6).
6
7
7. Pull the indicated Knob (9), insert the Seat
Bracket (33) through the front bracket (B) on the
Bench Frame (1), and then release the Knob into
one of the adjustment holes in the Seat Bracket.
See the inset drawing. Tighten an M6 x 10mm
Screw (35) into the small hole in the end of the
Seat Bracket (33).
8
6
1
9
35
6
A
33
1
B
9
35
33
Summary of Contents for Carbon Strength Olympic System
Page 5: ...5 STANDARD SERVICE PLANS...
