PS-4000B Series User Manual
128
Procedure
NOTE:
Replacement of the battery in the PS-B unit other than with the type specified
in this documentation may present a risk of fire or explosion.
Step
Action
1
Disconnect the power supply to the PS-B unit.
2
Touch the housing or ground connection (not the power supply) to discharge
any electrostatic charge from your body.
3
1
Remove the black plastic cover from the battery compartment.
2
Carefully pull out the battery using removal strips.
4
The battery should not be held by its edges. Insulated tweezers may also be
used for inserting the battery.
5
Insert the new battery with correct polarity.
6
To make the next battery change easier, be sure the removal strip is in place
when inserting battery.
7
Reconnect the power supply to the PS-B unit (plug in power cable and press
power button).
8
You may need to reset the date and time in the BIOS settings.
Summary of Contents for PS-4000B Series
