Pro-face PL-6700 Series, User Manual

Page: 36 / 97

3 - 5
PL-6700 Series User’s Manual
Optional Units and Expansion Boards
5) Position the module so that its con-
tacts are directly in front of the DIM
socket and tilted up slightly.
7) Push the module slowly but firmly
into the socket, until the module’s
clips lock in place.
6) Then, tilt the module down so that
the module and socket’s contacts
are parallel.
Push
here
Alignment
Slots
Be sure to only push on the
points shown here. Pushing
on any other point may
cause the module to break.
[To Remove the DIM Module]
When removing the module from the socket, please spread the socket’s sides as shown.
4) Position the module so that its align-
ment slot and the DIM module’s
alignment slot are aligned.